unlock mobile phones cables flash boxes clips repair fix diagnostics tuning customize cars obd2 codes reader mastercode

    Estado de su pedido
    Carrito de compra
    Ultimos precios
    Contactenos

Bienvenido visitante conectar/registrarse
Hoy es 30 de Julio, 2010

Busqueda intuitiva

Shops

Marcas

Recursos

Gifts for wife
Regalos para mujeres
Regalos para hombres

Hotline+34 693802240

Ult. Busquedas

Mas busquedas...
Productos mas buscados

» Seguridad » Alarm Equipment » GSM / GPRS Alarm System » GPRSGSM-PIR-ALARM-SYS-R150443

GPRS/GSM PIR Alarm System with MMS/ EMS/E-mail Remote Control and Night Vision Photo-taking Camcorder(YL-007M6)

Referencia del producto: GPRSGSM-PIR-ALARM-SYS-R150443

Informacion del producto:

Disponibilidad
Generalmente es despachado en 7 dias

Calcular coste del envio

Precio
173.95 € Sugiera un precio
Consulte el precio en su moneda
148.21 € exc. VAT

Peso
0.5 Kg.
Creado
26/12/2009

Descuento por Cantidades
2	-	4	165.25 €
5	-	9	156.56 €
10	-	24	139.16 €
25	-	99	Conectar
100	+		Conectar
Si desea comprar GPRS/GSM PIR Alarm System with MMS/ EMS/E-mail Remote Control and Night Vision Photo-taking Camcorder(YL-007M6) aun mas barato, a precios de distribuidor puede hacerlo en http://ipmart.es (Compra minima 500 Euros)

GPRS/GSM PIR Alarm System with MMS/ EMS/E-mail Remote Control and Night Vision Photo-taking Camcorder(YL-007M6)

Print GPRS/GSM PIR Alarm System with MMS/ EMS/E-mail Remote Control and Night Vision Photo-taking Camcorder(YL-007M6)

Enviar a un amigo por correo electronico GPRS/GSM PIR Alarm System with MMS/ EMS/E-mail Remote Control and Night Vision Photo-taking Camcorder(YL-007M6)

Ver mas productos en la categoria Sistema de alarma GSM y GPRS

Descripcion:

This product is multi-functional with PIR, 0.3MP Night vision photo-taking, video recording functions and MMS/ EMS/E-mail Remote Control. It’s very convenient to setup and operate on it. Once anybody enters into the defense zones, it’ll automatically take scene photos and send to mobile phones for alarm in time; it can also record the real-time video as proof for later checking. When you’re not at home, you can control the device by SMS, make it take scene photos and send them back to your mobile via MMS. It can be universally used in families, shops, garages, finance offices or counting rooms and other important places.
Operation Instructions:

1. Power On
Open the back cover, insert effective SIM card and Micro SD card, put in the Li-battery, connect the adapter and switch on it, the device will be under self-inspection (Red LED, always on); after the self-inspection, the device will be under GSM searching (Orange LED, slowly flashing); if the LED keeps on being Orange and flashes slowly, it means that GSM can’ t be found, you can switch off the power and check SIM card status.
(If there is no Micro SD card inserted before power on, the MMS function won’t work)

2. System Installation
Put the host on the bracket, install the bracket on the wall of about 2 meters height or at other suitable place, and adjust the lens at the target surveillance area.
Notes for setup:
1)The camera angle is 60 degrees, please well estimate the surveillance area at fixing the device;
2)If within 5 meters, the detector is at high sensitivity and the photo taking will be clear; the effect will not be so good if over 5 meters;
3)Avoid setting the device outdoor, outside the window, beside air-conditioner, burner or places with strong sunshine, because high temperature may cause false alarming;
4)Avoid huge block within detection area;
5)Do not set the device at places without GSM signal, or, real-time communication is unavailable;
6)It’s suggested to set the device indoor and avoid strong electromagnetism interference etc.

3.Key Functions: 1)Alarm.
At emergency, user can press the “Alarm” key, the system will immediately alarm no matter at arm status or disarm status.
2)Arm.
Before going out, presses the “Arm” key on remote controller and there will be reminding sound from buzzer; according to the delay time set, the system will be under arm status after delay time. If there is someone within the alarm zone or the detector related is triggered, it will be immediately under alarm status and take scene photos within 3 seconds, then it’ll send and save this photo, send SMS, dial relative numbers, make video record etc. 3)Disarm.
When you’re back home, press the “Disarm” key on remote controller and there will be reminding sound from buzzer, then the system will be under disarm status; In such situation it won’t alarm if user moving in the zones or the related detectors triggered ; expect special defense zone triggered (gas detector, smoke detector and emergency button etc.).
4)Video record.
User can open or close video record function as they like, and they can set the recording time also. If the video record function is opened and the system is under disarm status, the system will send MMS, SMS, make alarm calls first, then do video record. Under recording status, the system will not receive any orders.
Note: The record file will be saved into the Micro SD card, and the recording time will be the name of record files.

4.Receive alarm
Once alarm triggered, the system will send SMS, MMS, make calls and video record. Once the call get through the siren will be turn off automatically .Any user who gets the call can do listen-in, talk, intercom and other operations.
If the system calls the 1st user, no one receives it or user just hangs it off, system will automatically call the next number, till someone receives it or after 5 times calling one by one; then the system will do video record as pre-set, if close the video record function, system will exit from alarm status automatically, and then returns back to the working status before alarm.

Package Contains

Alarm host * 1
Li-battery * 1
remote controller * 2
door sensor * 1
adapter * 1
bracket * 1
manual *1
screws * several
two-sides glue tape * 1

Specifications

[ Mas productos en Sistema de alarma GSM y GPRS ]