Memoria 1.4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system
memory
* Due to Windows 32-bit operating system limitation, when more than 4 GB of
physical memory is installed, the actual memory size displayed will be less
than 4 GB.
2.Dual channel memory architecture
3.Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules
4.Support for non-ECC memory modules
5.Support for Extreme Memory Profile (XMP) memory modules
(Please refer “Memory Support List” for more information.)
Onboard Graphics Integrated in the Chipset:
1.1 x HDMI port, supporting a maximum resolution of 1920×1200

Audio 1.Realtek ALC889 codec
2.High Definition Audio
3.2/4/5.1/7.1-channel
* To configure 7.1-channel audio, you have to use an HD front panel audio
module and enable the multi-channel audio feature through the audio driver.
4.Support for S/PDIF Out

LAN 1.1 x Realtek RTL8111E chip (10/100/1000 Mbit)

Expansion Slots 1.1 x PCI Express x16 slot, running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be
installed, be sure to install it in the PCIEX16 slot.
2.1 x PCI Express x16 slot, running at x4 (PCIEX4)
3.2 x PCI Express x1 slots
(All PCI Express slots conform to PCI Express 2.0 standard.)
4.2 x PCI slots

Multi-Graphics Technology 1.Support for AMD CrossFireX™ technology
* The PCIEX16 slot operates at up to x4 mode when AMD CrossFireX™ is
enabled.

IDE ATA Chipset:
1.2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA
6Gb/s devices
2.4 x SATA 3Gb/s connectors (SATA2_2~SATA2_5) supporting up to 4 SATA
3Gb/s devices
* The SATA2_5 connector will become unavailable when the mSATA
connector is installed with a solid-state drive.
3.Support for RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels,
the system performance of the RAID set may vary depending on the devices
being connected.

USB Chipset:
1.Up to 12 USB 2.0/1.1 ports (6 ports on the back panel, 6 ports available
through the internal USB headers)

Internal I/O Connectors 1.1 x 24-pin ATX main power connector
2.1 x 4-pin ATX 12V power connector
3.2 x SATA 6Gb/s connectors
4.4 x SATA 3Gb/s connectors
5.1 x mSATA connector
6.1 x CPU fan header
7.2 x system fan headers
8.1 x power fan header
9.1 x front panel header
10.1 x front panel audio header
11.1 x S/PDIF Out header
12.3 x USB 2.0/1.1 headers
13.1 x clearing CMOS jumper
14.1 x Trusted Platform Module (TPM) header

Rear Panel I/O 1.1 x PS/2 keyboard/mouse port
2.1 x parallel port
3.1 x serial port
4.1 x optical S/PDIF Out connector
5.1 x HDMI port
6.6 x USB 2.0/1.1 ports
7.1 x RJ-45 port
8.3 x audio jacks (Line In/Line Out/Microphone)

I/O 1.iTE IT8728 chip

H/W Monitoring 1.System voltage detection
2.CPU/System temperature detection
3.CPU/System/Power fan speed detection
4.CPU overheating warning
5.CPU/System/Power fan fail warning
6.CPU/System fan speed control
* Whether the CPU/system fan speed control function is supported will depend
on the CPU/system cooler you install.

BIOS 1.2 x 32 Mbit flash
2.Use of licensed AWARD BIOS
3.Support for DualBIOS™
4.PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b

Unique Features 1.Support for @BIOS
2.Support for Q-Flash
3.Support for Xpress BIOS Rescue
4.Support for Download Center
5.Support for Xpress Install
6.Support for Xpress Recovery2
7.Support for EasyTune
* Available functions in EasyTune may differ by motherboard model.
8.Support for Smart 6™
9.Support for Auto Green
10.Support for eXtreme Hard Drive (X.H.D)
11.Support for ON/OFF Charge
12.Support for Cloud OC
13.Support for 3TB+ Unlock
14.Support for TouchBIOS
15.Support for Q-Share

Bundle Software 1.Norton Internet Security (OEM version)
2.Intel® Smart Response Technology
3.LucidLogix Virtu
* Make sure the monitor cable has been connected to the integrated graphics
port on the back panel.

Operating System 1.Support for Microsoft® Windows® 7/Vista/XP

Diseño 1.ATX Form Factor, 30.5cm x 21.5cm